Description
BOSS HOG® FCX4 Flush-Cut Turbo Blades may be used wet or dry. Made with high quality GE super-abrasive diamonds, they may be used for cutting granite, marble, engineered stone and similar materials. Four flush-cut holes allow the blade to be used with a 5/8" threaded adaptor (not included). This enables the user to use the side of the blade for grinding or to cut up against a backsplash or in other tight areas.
- Get fast, precise cutting with long life.
- Use on most hand-held grinders and circular saws.
- Side protection diamonds prevent binding while improving cutting performance.
Limited Lifetime Warranty
All diamond tool products including blades, coring bits, hole saws and grinding wheels include a limited lifetime warranty against warping, cracking and material defects. If any diamond tool (being used for its intended purpose with at least 50% of the diamond life remaining) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the tool may be replaced free of charge.
Use the table below as safe speed guidelines for your diamond blade.
| Blade Diameter | Rec. RPM | Max. RPM |
| 4" | 9,000 | 15,200 |
| 4-1/2" | 8,000 | 13,500 |
| 5" | 7,200 | 12,200 |
| 6" | 6,500 | 11,090 |
| 7" | 5,100 | 8,730 |
| 8" | 4,500 | 7,640 |
| 9" | 4,000 | 6,700 |
| 10" | 3,600 | 6,115 |
| 12" | 3,000 | 5,095 |
| 12" High Speed | N/A | 6,300 |
| 14" | 2,500 | 4,364 |
| 14" High Speed | N/A | 5,460 |
| 16" | 2,200 | 3,800 |
| 16" High Speed | N/A | 4,724 |
| 18" | 2,000 | 3,300 |
| 20" | 1,800 | 3,000 |
| 24" | 1,500 | 2,550 |
| 26" | 1,300 | 2,350 |
| 28" | 1,200 | 2,185 |
| 30" | 1,200 | 2,040 |
| 32" | 1,100 | 1,910 |
| 36" | 1,000 | 1,700 |
| 42" | 800 | 1,455 |
| 48" | 700 | 1,275 |
*Recommended RPM based on 9,500 SFPM.
You may also like
Browsing history