Cougar GT Premium Wet Diamond Core Bits for Cured Concrete with Rebar, Masonry & Stone, Sizes 1/2" thru 18", 14" Length

Roll over image to zoom in Click on image to zoom

Cougar GT Premium Wet Diamond Core Bits for Cured Concrete with Rebar, Masonry & Stone, Sizes 1/2" thru 18", 14" Length

Name: Cougar GT Premium Wet Diamond Core Bits for Cured Concrete with Rebar, Masonry & Stone, Sizes 1/2" thru 18", 14" Length
Brand: Delta Diamond Products
SKU: CORWP-0050
Price: 49.77 USD
Availability: InStock

Delta Diamond ProductsSKU: CORWP-0050

Select a Size Below

Size: 1/2" X 5/8" Threaded Arbor

Variant

Price:

$49.77 USD

Quantity:

Share this product

Cougar GT Premium Wet Diamond Bits are for drilling cured concrete with medium steel reinforcing as well as brick, block, and various stone materials. Featured is a standard 5/8"-11 or 1-1/4"-7 coarse threaded arbor that will connect to most core drilling machines.

Use with hand-held or rig mounted core drilling machines.
Features 8MM tall diamond segments for optimum drilling life.
Use for rotary drilling only. Not for use with roto-hammers or hammer drills.
Cougar GT Premium Wet Bits have a 14" drilling depth capacity before adding extensions.

Core Bit Size	Rec. Min RPM	Rec. RPM	Rec. Max RPM
1 Inch	2380	3180	3980
2 Inch	1190	1590	1990
3 Inch	790	1060	1320
4 Inch	590	790	990
5 Inch	477	636	790
6 Inch	390	560	660
7 Inch	340	450	560
8 Inch	290	390	500
9 Inch	260	350	490
10 Inch	230	310	400
12 Inch	200	260	330
14 Inch	170	220	280
16 Inch	150	200	250

How to find the right RPM
Start off with the recommended RPM on the table you see above. From there, you will need to adjust to different variables. Different types of aggregate will need different speed, pressure, water, etc. A good operator will be able to feel the right speed and pressure to use. It takes skill and experience to tell.

If the drilling speed is too high, the bit will glaze over the diamonds preventing it from drilling.

If its too low, the drilling will take far too long.

Adjust accordingly.

If you do find the bit is glazed over, but there is still segment left, take the bit out of the hole and drill into some soft, abrasive cinder block to open up new diamonds.

For drilling through rebar, do not apply additional pressure. Apply the same amount of of pressure and do not force the bit into the drill.

Any questions or comments please feel free to call us at 800-618-5000.

Cougar GT Premium Wet Diamond Core Bits for Cured Concrete with Rebar, Masonry & Stone, Sizes 1/2" thru 18", 14" Length

Select a Size Below

Description

Diamond Core Bit Recommended RPM

You may also like