Description
Super premium grade diamond blades for use on hand-held power saws for cutting ductile iron up to 120,000 psi! Featuring diamond side coating (to prevent binding and further extend the cutting life), this blade may also be used for cast iron, concrete-lined water pipe, cured concrete with rebar, sewer pipe, pvc pipe and asphalt.
- Cuts high nickel-content material as well as stainless steel!
- Safer to use than abrasive wheels with a much lower cost per cut.
- Guaranteed to cut dense, highly abrasive ductile iron up to 120,000 psi!
- Features a 1"-20mm arbor hole that adapts to 99% of all hand-held power saws.
Limited Lifetime Warranty
All diamond tool products including blades, coring bits, hole saws and grinding wheels include a limited lifetime warranty against warping, cracking and material defects. If any diamond tool (being used for its intended purpose with at least 50% of the diamond life remaining) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the tool may be replaced free of charge.
| Blade Diameter | Rec. RPM | Max. RPM |
| 4" | 9,000 | 15,200 |
| 4-1/2" | 8,000 | 13,500 |
| 5" | 7,200 | 12,200 |
| 6" | 6,500 | 11,090 |
| 7" | 5,100 | 8,730 |
| 8" | 4,500 | 7,640 |
| 9" | 4,000 | 6,700 |
| 10" | 3,600 | 6,115 |
| 12" High Speed | 3,000 | 6,300 |
| 14" High Speed | 2,500 | 5,460 |
| 16" High Speed | 2,200 | 4,724 |
| 18" | 2,000 | 3,300 |
| 20" | 1,800 | 3,000 |
| 24" | 1,500 | 2,550 |
| 26" | 1,300 | 2,350 |
| 28" | 1,200 | 2,185 |
| 30" | 1,200 | 2,040 |
| 32" | 1,100 | 1,910 |
| 36" | 1,000 | 1,700 |
| 42" | 800 | 1,455 |
| 48" | 700 | 1,275 |