Description
Flush Mount Adaptor can be used with a variety of different blades for cutting up close to corners, walls and backsplashes. Get to where you couldn't before. This adaptor allows small diameter blades with flush cut holes (4" - 10") to be used for flush cutting.
- Cut flush against a wall or floor.
- Use on a variety of different blades.
Limited Lifetime Warranty
All diamond tool products including blades, coring bits, hole saws and grinding wheels include a limited lifetime warranty against warping, cracking and material defects. If any diamond tool (being used for its intended purpose with at least 50% of the diamond life remaining) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the tool may be replaced free of charge.
Use the table below as safe speed guidelines for your diamond blade.
| Blade Diameter | Rec. RPM | Max. RPM |
| 4" | 9,000 | 15,200 |
| 4-1/2" | 8,000 | 13,500 |
| 5" | 7,200 | 12,200 |
| 6" | 6,500 | 11,090 |
| 7" | 5,100 | 8,730 |
| 8" | 4,500 | 7,640 |
| 9" | 4,000 | 6,700 |
| 10" | 3,600 | 6,115 |
| 12" | 3,000 | 5,095 |
| 12" High Speed | N/A | 6,300 |
| 14" | 2,500 | 4,364 |
| 14" High Speed | N/A | 5,460 |
| 16" | 2,200 | 3,800 |
| 16" High Speed | N/A | 4,724 |
| 18" | 2,000 | 3,300 |
| 20" | 1,800 | 3,000 |
| 24" | 1,500 | 2,550 |
| 26" | 1,300 | 2,350 |
| 28" | 1,200 | 2,185 |
| 30" | 1,200 | 2,040 |
| 32" | 1,100 | 1,910 |
| 36" | 1,000 | 1,700 |
| 42" | 800 | 1,455 |
| 48" | 700 | 1,275 |
*Recommended RPM based on 9,500 SFPM.
You may also like
Browsing history